Malibu Boats Boat Specifications Page 27

  • Download
  • Add to my manuals
  • Print
  • Page
    / 84
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 26
2-7
Speed Auto Cal
The speed can be calibrated automatically when the boat speed is between 15 and 36
MPH. To calibrate, scroll through the display menu to MPH/RPM. Press E to enter. The
MPH mode is all that can be recalibrated.
Malibu Cruise Control (Standard on all Boats)
Figure 2-9. Cruise Control
Located on the upper left corner of the display menu is the Malibu Cruise Control. To
activate the Malibu Cruise system, press the CRUISE button on the display panel. The
Cruise will default to the OFF position. To turn the Cruise on, press the Cruise button
again, and the system will be activated. The Cruise system will default to the last SET
speed display, and can be increased or decreased by pressing the up or down arrows. To
exit the Cruise display, press Cruise and you will return to the default screen.
Ballast Monitoring System (BMS) (Standard on Wakesetter Model)
Figure 2-10. BMS
All 23 Wakesetter LSV, Wakesetter XTi, and 21.5 Wakesetter VLX come standard with
the Ballast Monitoring System (BMS) display. The BMS can be used to visually see the
amount of water ballast that is in each tank. The ballast amount is monitored in 1/4 tank
increments, and can monitor the front, center, left and right rear tanks. The ballast fill
switches are located on the dash switch panel labeled MLS. To activate the BMS, press
the BALLAST button on the Dash Display. The BALLAST display window will show.
To exit the BALLAST display screen, press the Red button; this defaults to your
Favorites Screen.
SPEED ON
ACTUAL
SET
0.0
25.0
SPEED OFF
ACTUAL
SET
0.0
25.0
Chapter 2 doc.qxd 7/18/05 4:00 PM Page 7
Page view 26
1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 83 84

Comments to this Manuals

No comments