Malibu Boats Boat Specifications download pdf (Page 55)

3-11

Before tying up the boat, be sure to use enough fenders to protect the boat from damage.

If possible, tie up with the bow toward the waves with a good quality double-braided

nylon line. Tie up only to the lifting or tie-down eyes; never use the handrails or

windshield frames. If the boat is to be moored for a long period of time, use chafing

protectors on lines to protect the gelcoat finish. Leave a little slack in the lines to allow

for some wave movement or tidal action if applicable.

Follow these guidelines when departing:

•Very slowly shift into forward at idle speed.

• When the stern moves away from the dock, turn the engine away from the dock.

• Cast off bow line and back away.

If the wind or current is pushing away from the dock, cast off all lines and allow to drift

until you are clear.

High Speed Operation

A great deal of caution must be exercised when operating any boat at high speeds. This is

particularly true during turns. Gradual turns can be completed at high speed by a

competent driver, but it must be emphasized that sudden turns at any speed, particularly

at high speed can be especially dangerous. It is possible to throw passengers from their

seats and even from the boat if caution is not exercised.

Chapter 3 doc.qxd 7/18/05 4:00 PM Page 11

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 83 84

No comments

Malibu Boats Boat Specifications Page 55